Products description
Commodity |
stainless steel coil&Sheet and aluminum coil |
Thickness |
0.03mm~3mm or customized thickness |
Edge |
Slit edge / Mill edge |
Grade |
stainless steel:301、304、316、430、443、439 |
aluminum:1070、3003、5052 | |
colour |
Natural、red、purple、 green、 champagne、blue、 white、black or customized according to customer’s request |
Surface |
2D、2B、BA、8K mirror、coated |
Standard |
ASTM、ASME、EN、JIS、ISO、GB |
MOQ |
1KG |
Sample |
Samples are free but you should pay the freight cost |
Payment |
T/T 30% for deposit, Balance against the copy of B/L; or L/C at sight |
shipment |
Wooden pallet or according to customer’s request |
Application |
Widely used in the furniture industry, water system, food industry, shipbuilding industry, chemical equipment, public health equipment, etc. |
Chemical composition
Grade | C | Si | Mn | P | S | Ni | Cr | Mo | N | Cu | Ti |
301 | ≤0.15 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 6.00-8.00 | 16.00-18.00 | ≤0.25 | |||
304 | ≤0.08 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 8.00-11.00 | 18.00-20.00 | ||||
316L | ≤0.03 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 10.00-14.00 | 16.00-18.00 | 2.00-3.00 | |||
430 | ≤0.12 | ≤1.00 | ≤1.25 | ≤0.04 | ≤0.03 | 16.00-18.00 | |||||
443 | ≤0.015 | ≤1.00 | ≤1.00 | ≤0.04 | ≤0.03 | ≥20 | ≤0.025 | ≤0.3 | ≤0.8 | ||
439 | ≤0.030 | ≤1.00 | ≤1.00 | ≤0.04 | ≤0.015 | 17.5-18.5 | ≤0.030 |
Surface Finish
|
Definition
|
Application
|
|
2B
|
Those finished, after cold rolling, by heat treatment, pickling or other equivalent treatment and lastly by cold rolling to given appropriate luster.
|
Medical equipment, Food industry, Construction material, Kitchen utensils.
|
|
BA
|
Those processed with bright heat treatment after cold rolling.
|
Kitchen utensils, Electric equipment, Building construction.
|
|
8K
|
8K mirror panel | large shopping malls, rich clubs, colorful bars, luxury KTV, clothing display cabinets,wall panels, ceilings, elevator car panels, car board panels, building decoration, signboards, etc | |
HL | Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size. | Building construction. | |
NO.3 | Those finished by polishing with No.100 to No.120 abrasives specified in JIS R6001. | Kitchen utensils, Building construction. | |
NO.4 | Those finished by polishing with No.150 to No.180 abrasives specified in JIS R6001. | Kitchen utensils, Building construction, Medical equipment. |